Electronics Parts 
Electrical & Industrial 
Lab Equipment's 
Power Supply 
Gadgets & Gear 
Miscellaneous 
Services 
Recycle Bin 
🚚 Delivery In Bangladesh.
( Cash on delivery within 1-2 days all over Bangladesh. )
☑ Receive from Office: Free.
☑ Inside Dhaka: 80 TK.
☑ Outside Dhaka: 150 TK.
☑ Express Delivery: 150 TK+
☑ Enjoy Free delivery on orders above 3,500 TK
Digital Load-Cells Signal Indicator & Controller BTS106-B60S[L]
Product Code: ISN033Category: Sensor & Controller
The BST106-B60S[L] is a digital load-cell signal indicator and controller is used for displaying and controlling weight or force measurements from load cells in industrial applications.
Order by Call
Digital Load-Cells Signal Indicator & Controller BTS106-B60S[L]
The BST106-B60S[L] is a digital load-cell signal indicator and controller manufactured by Supmeter. It is used for displaying and controlling weight or force measurements from load cells in industrial applications.
Key features
- Applications: It can be used for weight and force display, peak value detection and hold, automatic checkweighing, and setpoint-based digital and analog outputs.
- Display: The unit has a 5-digit red LED display for showing weight and other operational information.
- Performance:
- It features a 24-bit high-precision A/D conversion module with an internal resolution of 1/1,000,000.
- A high sampling frequency of 1280 Hz ensures rapid response.
- A special anti-vibration algorithm ensures stability and accuracy even in environments with strong vibrations.
- Inputs and outputs:
- Weighing signal interface: Compatible with mV, V, and mA signals from various types of load cells.
- Communication ports: Includes optional RS232 and RS485 communication ports that support Modbus-RTU protocol for connecting to a host IPC/PLC or remote display.
- Analog output: Has an optional and definable analog signal output, such as 4–20mA or 0–10V.
- Switch input/output: Features definable switch inputs (DI) and relay switch outputs (DO) for alarms and control functions.
- Calibration: The controller offers multiple calibration methods, including zero calibration, load calibration, and segmenting span correction for high accuracy.
- Power and construction:
- Operating voltage: The unit can be powered by DC24V (±20%). Some variants may also support AC power.
- Protection: The front panel is IP65 rated, making it dust-tight and protected against water jets.
- Dimensions: The panel cut-out size is 94 x 47 mm.
Wiring diagram
According to the manual for the BST106-B60S[L] and its variants, the terminals are connected as follows:
| Terminal | Description |
|---|---|
| DC+ | DC input + |
| DC- | DC input - |
| EXC+ | Excitation voltage + (DC5V) |
| EXC- | Excitation voltage - |
| SIG+ | Weighing signal input + |
| SIG- | Weighing signal input - |
| SHD / GND | Shield Ground |
| TXD | Transmit data (RS232) |
| RXD | Receive data (RS232) |
| A+ | Data + (RS485) |
| B- | Data - (RS485) |
| DI1 | Switch signal input 1 |
| AO+ | Analog output + |
| AO- | Analog output - |
| OP_1 | DO1 Normally open contact |
| COM_1 | DO1 Common terminal |
| CL_1 | DO1 Normally closed contact |
| OP_2 | DO2 Normally open contact |
| COM_2 | DO2 Common terminal |
| CL_2 | DO2 Normally closed contact |
Note: The manual specifies that for V and mA weighing signals, terminals
SIG- and EXC- should be shorted together.Digital Load-Cells Signal Indicator & Controller BTS106-B60S[L]
The BST106-B60S[L] is a digital load-cell signal indicator and controller manufactured by Supmeter. It is used for displaying and controlling weight or force measurements from load cells in industrial applications.
Key features
- Applications: It can be used for weight and force display, peak value detection and hold, automatic checkweighing, and setpoint-based digital and analog outputs.
- Display: The unit has a 5-digit red LED display for showing weight and other operational information.
- Performance:
- It features a 24-bit high-precision A/D conversion module with an internal resolution of 1/1,000,000.
- A high sampling frequency of 1280 Hz ensures rapid response.
- A special anti-vibration algorithm ensures stability and accuracy even in environments with strong vibrations.
- Inputs and outputs:
- Weighing signal interface: Compatible with mV, V, and mA signals from various types of load cells.
- Communication ports: Includes optional RS232 and RS485 communication ports that support Modbus-RTU protocol for connecting to a host IPC/PLC or remote display.
- Analog output: Has an optional and definable analog signal output, such as 4–20mA or 0–10V.
- Switch input/output: Features definable switch inputs (DI) and relay switch outputs (DO) for alarms and control functions.
- Calibration: The controller offers multiple calibration methods, including zero calibration, load calibration, and segmenting span correction for high accuracy.
- Power and construction:
- Operating voltage: The unit can be powered by DC24V (±20%). Some variants may also support AC power.
- Protection: The front panel is IP65 rated, making it dust-tight and protected against water jets.
- Dimensions: The panel cut-out size is 94 x 47 mm.
Wiring diagram
According to the manual for the BST106-B60S[L] and its variants, the terminals are connected as follows:
| Terminal | Description |
|---|---|
| DC+ | DC input + |
| DC- | DC input - |
| EXC+ | Excitation voltage + (DC5V) |
| EXC- | Excitation voltage - |
| SIG+ | Weighing signal input + |
| SIG- | Weighing signal input - |
| SHD / GND | Shield Ground |
| TXD | Transmit data (RS232) |
| RXD | Receive data (RS232) |
| A+ | Data + (RS485) |
| B- | Data - (RS485) |
| DI1 | Switch signal input 1 |
| AO+ | Analog output + |
| AO- | Analog output - |
| OP_1 | DO1 Normally open contact |
| COM_1 | DO1 Common terminal |
| CL_1 | DO1 Normally closed contact |
| OP_2 | DO2 Normally open contact |
| COM_2 | DO2 Common terminal |
| CL_2 | DO2 Normally closed contact |
Note: The manual specifies that for V and mA weighing signals, terminals
SIG- and EXC- should be shorted together.Watch this video it will give you a clear idea about this product.
Related Product
In Stock
XMTD-2002 PID Digital Temperature Controller Microcomputer Thermostat 220V 0-399℃
In Stock
OMRON E3Z-R61 Photoelectric Sensor, E3Z Series, Retroreflective, 4 m, NPN, 12 to 24 Vdc, Pre-Wired
In Stock
PT100 Temperature Transmitter 0 -100 degree Celsius 24V Dc Output 0-10V
In Stock
A proximity sensor is a sensor able to detect the presence of nearby objects without any physical contact.This is the Inductive Proximity Sensor 12mm_Omron 0-30V DC NPN.
