Electronics Parts 
Electrical & Industrial 
Lab Equipment's 
Power Supply 
Gadgets & Gear 
Miscellaneous 
Services 
Recycle Bin 
🚚 Delivery In Bangladesh.
( Cash on delivery within 1-2 days all over Bangladesh. )
☑ Receive from Office: Free.
☑ Inside Dhaka: 80 TK.
☑ Outside Dhaka: 150 TK.
☑ Express Delivery: 150 TK+
☑ Enjoy Free delivery on orders above 3,500 TK
RF 315MHz 4 Channel Wireless Remote Control
Product Code: CRF002Category: RF
RF 315MHz 4 Channel Wireless Remote Control
Order by Call
RF 315MHz 4 Channel Wireless Remote Control
Features:
- 1. CMOS Technology
- 2. Low Power Consumption
- 3. Very High Noise Immunity
- 4. Up to 12 Tri-State Code Address Pins
- 5. Up to 6 Data Pins
- 6. Wide Range of Operating Voltage: Vcc = 4 ~ 15 Volts
- 7. Single Resistor Oscillator
- 8. Momentary Output Type
- 9. Application environment: Wireless remote control switch, remote control socket, data transmission and remote control toys, anti-theft alarm host, garage doors, gates, gate, the gate door control, such as industry and its remote control sound field, etc.
Specifications:
1. Remote Control
- 1. Operating voltage: DC12V (27A / 12V battery a)
- 2. Working Current: 10mA / 12V
- 3. Radiation power: 10mw /12V
- 4. Modulation: ASK (amplitude modulation)
- 5. Transmission frequency: 315MHZ (SAW frequency stabilization)
- 6. Transmission distance: 50-100M (no proof, the receiver sensitivity is negative 100dbm)
- 7. Encoder Type: Fixed code
2. Decoding receiver board
- 1. Working voltage DC5V
- 2. Receiver sensitivity is -98db.
- 3. Size: 41*22mm
- 4. There are four buttons on the remote control, corresponding to the receiving board feet four data bits D0, D1, D2, D3. Press the button to transmit a signal, the corresponding data bit will output high.
Packing List:
- 1 x Wireless module
- 1 x Remote Control
Weight: 1.76 oz (50 g)
RF 315MHz 4 Channel Wireless Remote Control
Features:
- 1. CMOS Technology
- 2. Low Power Consumption
- 3. Very High Noise Immunity
- 4. Up to 12 Tri-State Code Address Pins
- 5. Up to 6 Data Pins
- 6. Wide Range of Operating Voltage: Vcc = 4 ~ 15 Volts
- 7. Single Resistor Oscillator
- 8. Momentary Output Type
- 9. Application environment: Wireless remote control switch, remote control socket, data transmission and remote control toys, anti-theft alarm host, garage doors, gates, gate, the gate door control, such as industry and its remote control sound field, etc.
Specifications:
1. Remote Control
- 1. Operating voltage: DC12V (27A / 12V battery a)
- 2. Working Current: 10mA / 12V
- 3. Radiation power: 10mw /12V
- 4. Modulation: ASK (amplitude modulation)
- 5. Transmission frequency: 315MHZ (SAW frequency stabilization)
- 6. Transmission distance: 50-100M (no proof, the receiver sensitivity is negative 100dbm)
- 7. Encoder Type: Fixed code
2. Decoding receiver board
- 1. Working voltage DC5V
- 2. Receiver sensitivity is -98db.
- 3. Size: 41*22mm
- 4. There are four buttons on the remote control, corresponding to the receiving board feet four data bits D0, D1, D2, D3. Press the button to transmit a signal, the corresponding data bit will output high.
Packing List:
- 1 x Wireless module
- 1 x Remote Control
Weight: 1.76 oz (50 g)
Watch this video it will give you a clear idea about this product.
Related Product
In Stock
5.8G 40CH FPV DJI Video Transmitter & Receiver_TS832 + RC832 Wireless 600mW 6km AV
In Stock
HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino
